We offer a wide variety of short cut fibers:

Click here for common measurement conversions.

Short Cut Acrylic Fibers     More Information

          - Available in diameters of 1.5, 3.0 and 15.0 denier per filament (dpf) and lengths starting at 1mm (.04")

          - Available in crimped and uncrimped varieties

          - Used for reinforcement, crack resistance, and porosity control

Short Cut Bi-Componenet Fibers     More Information

          - Available in several compositions and diameters, in lengths starting at 2mm (0.8")

          - Used for thermal bonding, reinforcement, porosity control and flexural strength

Short Cut Nomex Fibers     More Information

          - Available in 2.0 denier per filament (dpf) and lengths starting at 2mm (.08")

          - Used in flame retardant products and high heat applications

Short Cut Nylon Fibers    More Information

          - Available in diameters of 1.0, 3.0, 6.0, and 12.0 denier per filament (dpf) and lengths starting at 2mm (.08")

          - Available in bright, dull, or semi-dull luster

          - Used for reinforcement and tear resistance

Short Cut Polyester Fibers     More Information

          - Available in diameters ranging from 0.5 to 25.0 denier per filament (dpf) and lengths starting at 2mm (.08")

          - Available in regular or high tenacity, regular or low shrinkage, and undrawn binder fiber

          - Used for reinforcement, porosity control, dimensional stability, and flexural strength

Short Cut Polyethylene Fibers     More Information

          - Available in 5.0 denier per filament (dpf) and lengths starting at 2mm (.08").  Other deniers upon request.

          - Available in biodegradable or low melt varieties

          - Used for thermal bonding, vapor seals, and gas release applications in foundries, etc.

Short Cut PolyLactic Acid (PLA) Fibers     More Information

          - Available in 1.3 denier per filament (dpf) and lengths starting at 3mm (1/8")

          - Used for biodegradability, flexural strength, improved wicking, increased bulk, odor control, porosity control, reduced shrinkage, reinforcement, tear resistance, thermal bonding, and UV stability

Short Cut Polypropylene Fibers     More Information

          - Available in diameters of 0.7, 2.0, 3.0, 7.0, 12.0 and 15.0 denier per filament (dpf) and lengths starting at 3mm (1/8")

          - Available in multicolor or natural colored varieties

          - Used for thermal bonding, reinforcement, and porosity control

Short Cut Rayon Fibers     More Information

          - Flocking Tow in diameters ranging from 0.5 to 25.0 denier per filament (dpf) and lengths starting at less than 1mm (.04")

          - 1.5 denier Tire Cord in lengths starting at 3mm (1/8")

          - Used for porosity control, and for reinforcement in plastic and rubber

Short Cut Thunderon^® Conductive Acrylic Fibers     More Information

          - Available in several diameters and lengths - contact us for details

          - Offers unmatched corona discharge, superb conductivity, and antibacterial effects

Other fiber types, diameters, and lengths are available upon request.

Click here for a side-by-side comparison of the above fiber properties.

"How do I choose the fiber type, diameter, or length I need?"

"Which fibers disperse best in wet-lay nonwovens?"

We also offer the following fibrillated synthetic pulps:

FYBREL^® Wet Lap Fibrillated Polyolefin Pulps     More Information

          - Available in fibrillated Polyethylene or Polypropylene

          - Available in wet lap bales with moisture contents of 30-66%

          - Available in several diameters and lengths

          - Used for thermal bonding, moldability, embossability, and as a moisture barrier

SHORT STUFF^® Dried Fibrillated Polyolefin Pulps     More Information

          - Available in fibrillated Polyethylene or Polypropylene

          - Available fluffed and dried in bags with moisture contents of less than 2%, or of 26-62%

          - Available in several diameters and lengths

          - Available in hydrophilic grades for improved dispersion in aqueous sysytems

          - Used for viscosity, thixotropy, crack resistance, reduced shrinkage, and as a processing aid

               in wet laid, air laid, and dry laid systems

MiniWEB 100% Synthetic Nonwoven Sheet     More Information

          - Available in 20gsm and 50gsm

          - Made entirely of fibrillated polyolefin fibers

          - Offers improved formation, increased strength, and lighter weight than other webs

And MiniFIBERS offers many services:

Custom Services     More Information

          - Custom cutting of specialty fibers

          - Application of specialty finishes

          - Fluffing and drying of wet lap pulp fibers

          - Custom packaging of any fiber

Click here for a detailed product list.